Aluminium Coil AA1100 H14 for ACP is a typical industrial pure aluminium (99.00% of aluminium), and cannot be heat treated. It has some features such as high anti-corrosion, great electrical conductivity and thermal conductivity, low density, plasticity is pretty good that can produce some aluminium profiles by pressure processing, but the strength of 1100 aluminium alloy is low. The other properties of 1100 aluminium alloy are basically the same with the 1050A aluminium alloy.
Aluminium Coil AA1100 H14 for ACP
|
Elements
|
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al | |||||
| Content | 0.95 | 0.05-0.2 | 0.05 | – | – | 0.1 | – | 0.15 | Remain | ||||||
| Alloy Temper | Specified | Tensile strength | Yield strength | Elongation | |||||||||||
| Thickness(in.) | (ksi) | (ksi) | (%) | ||||||||||||
| 1100-O (annealed) | 0.006-0.019 | 11.0-15.5 | Min3.5 | Min15 | |||||||||||
| 0.020-0.031 | Min20 | ||||||||||||||
| 0.032-0.050 | Min25 | ||||||||||||||
| 0.051-0.249 | Min30 | ||||||||||||||
| 0.250-3.000 | Min28 | ||||||||||||||
| 1100-H12/1100-H22 | 0.017-0.019 | 14.0-19.0 | Min11.0 | Min3 | |||||||||||
| 0.020-0.031 | Min4 | ||||||||||||||
| 0.032-0.050 | Min6 | ||||||||||||||
| 0.051-0.113 | Min8 | ||||||||||||||
| 0.114-0.499 | Min9 | ||||||||||||||
| 0.500-2.000 | Min12 | ||||||||||||||
| 1100-H14/1100-H24 | 0.009-0.012 | 16.0-21.0 | Min14.0 | Min1 | |||||||||||
| 0.013-0.019 | Min2 | ||||||||||||||
| 0.020-0.031 | Min3 | ||||||||||||||
| 0.032-0.050 | Min4 | ||||||||||||||
| 0.051-0.113 | Min5 | ||||||||||||||
| 0.114-0.499 | Min6 | ||||||||||||||
| 0.500-1.000 | Min10 | ||||||||||||||
| 1100-H16/1100-H26 | 0.006-0.019 | 19.0-24.0 | Min17.0 | Min1 | |||||||||||
| 0.020-0.031 | Min2 | ||||||||||||||
| 0.032-0.050 | Min3 | ||||||||||||||
| 0.051-0.162 | Min4 | ||||||||||||||
| 1100-H18/1100-H28 | 0.006-0.019 | Min22.0 | – | Min1 | |||||||||||
| 0.020-0.031 | Min2 | ||||||||||||||
| 0.032-0.050 | Min3 | ||||||||||||||
| 0.051-0.128 | Min4 | ||||||||||||||
| 1100-H112 | 0.025-0.499 | Min13.0 | Min7.0 | Min9 | |||||||||||
| 0.500-2.000 | Min12.0 | Min5.0 | Min14 | ||||||||||||
| 2.001-3.000 | Min11.5 | Min4.0 | Min20 | ||||||||||||
Tell us freely to get more details about Aluminium Coil AA1100 H14 for ACP. Email: joy@gloryalum.com
Last article: 3003 H24 color coated aluminum coil for table panel/ wall/roofing/insulation
Next article Aluminium Coil Used for Aluminium Sheet & Strip Producing
Copyright @2021 Jianhui Aluminum Privacy Policy All rights reserved.sitemap
