HOME » Knowledge » Best aluminum Al Alloy sheets plates seller

Best aluminum Al Alloy sheets plates seller

aluminum sheet 5005

The temper designation follows the  aluminum Al Alloy sheets code and is separated by a hyphen.

-F As Fabricated: Applies to products of rolling or forming where there is no special control over the thermal or work-hardening conditions. Since mechanical properties may vary widely, no limits have been assigned. This temper usually applies to sheet products which are at intermediate stages of production.

-H Strain-Hardened: Applies to wrought products which are strengthened by cold-rolling or cold-working.

-O Annealed: Applies to wrought products which have been heated above the recrystallization temperature to produce the lowest tensile strength condition of the alloy.

Average1     Thermal Electrical Conductivity at 68°F Electrical
  Coeffecient of Melting   (Percent of International Resistivity
  Thermal   Conductivity Annealed Copper Standard) at 68°F
  Expansion Range 2,3 Density (English     (Ohms-Cir.
Alloy Equal Equal
68° to 212°F Approximately (lbs/cubic in.) Units4) Mil/Foot)
  (°F) (°F)     Volume Volume  
               
1100 13.1 1190-1215 0.098 1520 59 194 18
1350 13.2 1195-1215 0.0975 1625 62 204 17
2024-O 12.9 935-11805 0.100 1340 50 160 21
2024-T3,T4 12.9 935-11805 0.100 840 30 96 35
2024-T6 12.9 935-11805 0.100 1050 38 122 27
3003 12.9 1190-1210 0.099 1200 48 156 22
3004 13.3 1165-1210 0.098 1100 41 134 25
3005 13.1 1175-1210 0.098 1190 45 148 23
5005 13.2 1170-1210 0.098 1390 52 172 20
5050 13.2 1155-1205 0.097 1340 50 165 21
5052 13.2 1125-1200 0.097 960 35 116 30
5056 13.4 1055-1180 0.096 790 28 95 37
5182 13.4 1055-1180 0.096 790 28 95 37
5657 13.2 1180-1215 0.097 960 35 116 30
6061-O 13.1 1080-12056 0.098 1250 47 155 22
6061-T4 13.1 1080-12056 0.098 1070 40 132 26
6061-T6 13.1 1080-12056 0.098 1160 43 142 24

Material properties such as light weight combined with high strength and resistance to corrosion contribute to low environmental loading. After iron, aluminium is now the second most widely used metal in the world.
This is because  aluminum Al Alloy sheets has a unique combination of attractive properties:

•      Low weight
•      High strength
•      Superior malleability
•      Easy machining
•      Excellent corrosion resistance
•      Easy to mill, drill, cut, punch, bend, weld, bond, tape…

if you want to know more about  aluminum Al Alloy sheets, pls feel free to tell me.

Last article: 2A12 5052 5083 6061 6083 7075 Aluminum Sheet Price per kg

Next article OPA/ALU/PVC alu-alu bottom foil Medi alualu protective foil for medical packaging