buy 1050 aluminum plate h18 h22 h24
1050 aluminum plate belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum plate, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum plate. Jianhui aluminum can reach this standard. For its simple processing technology, 1050 aluminum plate is much cheaper comparing to other aluminum alloys plate and it is very commonly used in industry.
For its content above in the chart, 1050 aluminum plate has high ductility and high reflective finish. Besides, 1050 aluminum plate is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminum plate has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum plate suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application.
1050 aluminum plate h18 h22 h24 Machining:
Pure aluminium has only fair machinability due to the softness of the alloy. The half-hard temper increases the hardness over the annealed/soft base alloy but could not be described as free chipping compared to the harder, alloyed aluminium’s.
We recommend aluminium geometry cutting tools running at a reasonable speed to avoid the edge build-up which can occur at lower cutting speeds. High speed steel tools may be more economical than carbide, particularly with the possibility of a large rake angle on machines which cannot reach carbide cutting speeds.
1050 aluminum plate h18 h22 h24 Technical Assistance
Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical topic. . We believe this underlines our total commitment to quality and our ethos of being the complete service provider.