Used For Building/Constrction 2024 6061 7075–Known as the “aircraft alloy” in machining rod, this alloy has properties higher than 2017 and 2014. Though formability is generally considered only fair in the cold state, it is one of the most popular alloys for cold heading and roll threading applications. Can be machined to a high finish. Corrosion resistance is fair.
The Used For Building/Constrction 2024 6061 7075 is strong, easily machined, and weldable. Aluminum 6061 alloys are doubled the strength of aluminum 6063 alloys. Aluminum 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy. Order 6061 Aluminum Sheets in 6061 Aluminum in small quantities and no minimums of all Aluminum 6061
Used For Building/Constrction 2024 6061 7075 has been the strongest and hardest alloy sold commercially for decades. 7175 is more pure, but may not be suitable for fracture toughness applications. The superior stress corrosion resistance of the T73 and T7351 tempers of 7075 rolled or cold finished rod have made them a logical replacement for alloys 2014, 2017 and 2024 in many of the most critical applications.
Last article: color coated 5083 h321 aluminum coil Jianhui Aluminum